Olympus SP-610UZ - Manual (Page 31)

31 EN
3 Move the camera slowly while keeping it straight, and
stop the camera where the pointer and target mark
overlap.
The camera releases the shutter automatically.
AUTO AUTO
OK MENU Save Cancel
To combine only two pictures, press the A button
before taking a third frame.
4 Repeat Step 3 to take a third frame.
After the third frame is taken, the camera
automatically processes the frames and the
combined panorama image is displayed.
To exit the panorama function without saving an
image, press the m button.
If the shutter does not automatically release, try
[Manual] or [PC].
Taking pictures with [Manual] Taking pictures with [Manual]
1 Use FGHI to specify at which edge the next
picture is to be connected.
Direction for
combining the next
frame
MANUAL
OK Set
MANUAL
●
●
2 Press the shutter button to take the fi rst frame.
1st frame
MANUAL MANUAL MANUAL MANUAL
1 2 1 2
MENU OK Save Cancel
Joint areas
3 Compose the next shot so that joint area 1 overlaps
joint area 2.
Composition of the 2nd frame
1 2 1 2
MENU OK Save Cancel
MANUAL MANUAL
4 Press the shutter button to take the next shot.
To combine only two pictures, press the A button
before taking the third frame.
5 Repeat steps 3 and 4 to take a third frame.
After the third frame is taken, the camera
automatically processes the frames and the
combined panorama image is displayed.
To exit the panorama function without saving an
image, press the m button.
●