Onkyo TX-NR414 - Manual (Page 38)

Turning On & Basic Operations
En-38
Using Headphones
1 Connect a pair of stereo headphones with a
standard plug (1/4 inch or 6.3 mm) to the
PHONES
jack.
While the headphones plug is inserted in the PHONES
jack,
indicator lights.
Note
• Always turn down the volume before connecting your
headphones.
• While the headphones plug is inserted in the PHONES
jack, the speakers are turned off.
• When you connect a pair of headphones, the listening mode
is set to Stereo, unless it’s already set to Stereo, Mono,
Direct, or Pure Audio (European, Australian and Asian
models).
• If you connect an iPod or iPhone to the USB port on the AV
receiver, no sound will be output from the headphones jack.