Optiview DVR - Manual (Page 26)

User’s Manual
21
3.5.4 Per Camera Configuration
This function is used to set the Day / Night / Weekend PPS (Picture per
Second) and Quality for each channel. The Preset Configuration must be set
to <OFF> for accessing these schedules. The menu is displayed as below
(Record Mode: 720×240@60PPS in NTSC / 720×288@50PPS in PAL).
Per Camera Config
Cameral Select
Normal PPS
Normal Qlty
Event Max PPS
Event Qlty
Event Acti
Day
7.5
Mid
30
Best
Both
Night
7.5
Mid
30
Best
Both
CH1
Weekend
7.5
Mid
30
Best
Both
• Firstly, select a wanted Camera for setting its record configuration. The
image and recording settings of the selected camera will be displayed on
the screen.
• Move the cursor using Direction keys and press ENTER to select an item.
• Change the value using UP / DOWN keys.
• Press ENTER to confirm the settings or ESC to abort.
• Press ESC to return to <Record Setup> Menu.
Please note that the total normal pps for all channels cannot exceed 120
NTSC (360×240@60PPS) / 100 PAL (360×288@50PPS) . To increase one
channel’s pps, you may have to reduce the others’ first. Event pps is not
restricted to this rule, since a smart event scheduler will handle to the total
pps with a correct weighting.
4. Basic Operation
The Versatile MPEG-4 DVR allows user to access some general operations
through the front panel easily. The following sections introduce the general
operations of the unit.
4.1 Viewing Live / Playback Video
The general functions can be accessed in both live and playback modes are
described in the following sections.