Onkyo CR-505 User Manual
Page 25
25
Using the Radio—
Continued
With the Auto Preset function you can automatically preset
all the FM stations available in your area.
1
Use the INPUT [ ]/[ ] buttons to select
FM.
2
Press the [MODE] button.
3
Use the [
]/[
] buttons to display “P-
EDIT,” and then press the [ENTER] button.
4
Use the [
]/[
] buttons to display
“A.PRESET,” and then press the [ENTER]
button.
Auto Preset function starts.
The Auto Preset function scans the FM band from low
to high, presetting up to 30 stations with strong signals.
Note:
All previously stored presets will be overwritten when the
Auto Preset function is used again.
Using the buttons on the CR-505:
1. Use the [INPUT] button to select FM.
2. Press the [MENU] button.
3. Turn the [
] control until “P-EDIT” appears on the
display and then push the [
] control.
4. Turn the [
] control until “A.PRESET” appears on
the display and then push the [
] control.
You can preset up to 40 of your favorite AM and FM radio
stations.
1
Tune into the station that you want to store
as a preset.
2
Press the [MODE] button.
3
Use the [
]/[
] buttons to display “P-
EDIT,” and then press the [ENTER] button.
4
Use the [
]/[
] buttons to display
“WRITE,” and then press the [ENTER] but-
ton.
The preset number flashes.
5
While the preset number is flashing, use
the [
]/[
] buttons to select a preset
from 1 through 40.
You cannot choose any preset number that has already
been registered for either the FM or AM station.
6
Press the [ENTER] button to store the sta-
tion.
The station is stored and the preset number stops flash-
ing.
Repeat this procedure for all of your favorite radio sta-
tions.
Note:
For European models, when the CR-505 is tuned into a sta-
tion that’s transmitting PS (Program Service Name) RDS
information, the station’s name will be displayed instead of
the frequency.
Using the buttons on the CR-505:
1. Tune into the station that you want to store as a preset.
2. Press the [MENU] button.
3. Turn the [
] control until “P-EDIT” appears on the
display and then push the [
] control.
4. Turn the [
] control until “WRITE” appears on the
display and push the [
] control.
5. While the preset number is flashing, use the [
]
control to select a preset from 1 through 40.
6. Press the [
] control to store the station.
You can select previously stored presets as follows.
Using the CR-505
1
Turn the [
] control to select presets.
Using the remote controller
1
Use the PRESET [
]/[
] buttons to
select presets.
Presetting FM Stations Automatically
Presetting Stations Manually
/
/
/
/
Selecting Presets
/
/
/
/
/
/
/