Omron Healthcare HEM-711DLX - Manual (Page 23)

The monitor automatically determines your ideal inflation level. In rare
circumstances when a higher inflation may be necessary, the monitor
automatically re-inflates the cuff up to 30 mmHg higher than the initial
inflation and restarts the measurement.
CAUTION
Operate the device only as intended. Do not use the device for any
other purpose.
1. Press the START/STOP button.
All symbols appear on the display. The cuff starts to inflate
automatically.
As the cuff inflates, the monitor automatically determines your ideal
inflation level. This monitor detects the pulse during inflation. Do not
move your arm and remain still until the entire measurement process
is completed.
NOTE: To stop the inflation or measurement, press the
START/STOP button. The monitor will stop inflating,
start deflating and will turn off.
TAKING A MEASUREMENT
23
START
STOP
262640 HEM-711 EN_SP_r2.qxp 1/15/07 11:33 AM Page 23