Olympus SCPH-10130U - Manual (Page 17)

ENGLISH
E-17
1 Select the desired language for the Menu screen, and 2 Enter the password (“ ”).
Power
indicator Multi Control
button POWER
switch
Multi Control button
The Multi Control button lets you easily control all
Eye-Trek functions from one convenient location.
●
Selects numbers for the password (
੬
pg. 18, 20, 23).
●
Adjusts the volume while watching an image
(
੬
pg. 21).
●
Selects desired items in the Menu screen
(
੬
pg. 22).
●
Adjusts the brightness while watching an image
(
੬
pg. 21).
●
Adjusts the items you want to set while the Menu is
on the display (
੬
pg. 22).
●
Confirms warning/health warning screens
(
੬
pg. 18, 24).
●
Displays the Menu screen while watching an image
(
੬
pg. 22).
●
Sets items selected on the Menu (
੬
pg. 22).
●
Sets the password (
੬
pg. 18, 20, 23).
SETTING UP THE Eye-Trek —Turning on the power for the first time—
On-Screen Display
E N G L I S H
D E U T S C H
F R A N Ç A I S
I T A L I A N O
E S P A Ñ O L
Put on the display unit, then turn the power
on and select the desired language.
Put on the display unit (
੬
pg. 14-15) and
press the POWER switch on the control unit.
The power indicator lights up in green and the
language selection screen appears. Move
the Multi Control button up/down (
ᮡ
,
ᮢ ) to
select the desired language, then press it.
A warning appears on the screen.
●
The mark appears next to the selected
language.
●
The language selection screen will not appear the
next time the power is turned on. Refer to the
reset instructions to change the language (
੬
pg.
22).
Note:
Make sure that the Power plug is connected
to the USB connector on the “PlayStation
® 2”
main unit correctly before turning on the
power. (
੬
pg. 12-13)
* Check that the “PlayStation ® 2’s” (standby) indicator lights up in green before turning on the
Eye-Trek (
੬
pg.16).
To the “PlayStation ® 2”
To the display unit
Move up/down •••••
ᮡ ᮢ
Press
Move right/left •••••
ᮤ ᮣ
1