Olympus C-360Zoom - Manual (Page 118)

117
6
U
sef
ul fu
nct
ions
PIXEL MAPPING
The Pixel Mapping feature allows the camera to check and adjust the CCD
and image processing functions. It is not necessary to operate this function
frequently. Approximately once a year is recommended. Wait over a minute
after the monitor is used or continuous shots are taken to allow for proper
performance of the Pixel Mapping function.
1
In the shooting mode top menu,
select MODE MENU
→ SETUP →
PIXEL MAPPING, and press .
"How to use the menus" (P.33)
• START is displayed.
2
Press .
• The BUSY bar is displayed during Pixel
Mapping. When Pixel Mapping is finished,
the screen returns to the mode menu.
• If you accidentally turn the camera off during Pixel Mapping, start again
from step 1.
OK button
Arrow pad
Note