Onkyo DV-SP406 - Manual (Page 21)

21
Adjust the settings
Note:
• Settings changed while the unit is On are saved to
memory when the unit is set to Standby. If the unit’s
power cord is unplugged while the unit is still On, any
changed settings will not be saved. Be aware of this
when the unit is connected to a switched AC outlet on
another component.
If the language selection menu doesn’t appear, make sure
the TV system setting (PAL, NTSC) (see page 20).
Adjust the language settings
Menu Language – Select a language for the Setup menu
and on-screen display.
Disc Audio/Subtitle/Menu – Select a language for the
Disc Audio/Subtitle/Menu.
[Original]: Refers to the original language in which
the disc was recorded.
[Other]: To select another language, press num-
ber buttons then
ENTER to enter the
corresponding 4-digit number according
to the language code list (see page 33).
If you make a mistake while entering
number, press
CLEAR to delete num-
bers then correct it.
[Off] (for Disc Subtitle) :
Turn off Subtitle.
Adjust the display settings
TV Aspect – Select which screen aspect to use based on
the shape of your TV screen.
[4:3]: Select when a standard 4:3 TV is con-
nected.
[16:9]: Select when a 16:9 wide TV is con-
nected.
Display Mode – If you selected 4:3, you’ll need to
define how you would like widescreen programs and
films to be displayed on your TV screen.
[Letterbox]:
This displays a wide-
screen picture with black
bands at the top and bot-
tom of the screen.
[Panscan]:
This fills the entire 4:3
screen, cropping the pic-
ture as necessary.
1 Display setup menu: SETUP
2 Select a desired option on the
first level: [
]/[ ]
3 Move to second level: [ ]
4 Select a desired option on the
second level: [
]/[ ]
5 Move to third level: [ ]
6 Change the setting: [ ]/[ ] /
ENTER
If there’s no picture on your TV, the TV system (PAL/
NTSC) setting on the DV-SP406 may be different to
the TV system supported by your TV.
In this case, press and hold down [ ] (Pause) on the
DV-SP406 or remote controller to switch between
PAL and NTSC. The North American model is fixed at
NTSC, so pressing [
] (Pause) has no effect.
ZOOM
AUDIO SUBTITLE ANGLE DISPLAY
SETUP
ENTER
TOP MENU
RETURN
RESOLUTION PROGRAM RANDOM
MARKER SEARCH REPEAT A-B
MENU
1
6
2–6
SETUP
ENTER
ENTER
ENTER
ENTER
ENTER
Adjust the settings - more you can do