Oricom DECT DIGITAL CORDLESS PHONE ECO71 - Manual (Page 24)

22
The outgoing message
The model is supplied with two predefined outgoing
OGUUCIGU
1)/ WUGF HQT VJG FKHHGTGPV CPUYGT OQFGU
6JGTG CTG  CPUYGT OQFGU CXCKNCDNG #PUYGT 1PN[
and Answer & Record.
$[ FGHCWNV VJG CPUYGT OQFG KU #059 4'%14&
which allows a caller to leave a message on the
answering machine. This can be changed to
#059'4 10.; OQFG YJKEJ FQGU PQV CNNQY ECNNGTU
to leave any messages on the answering machine.
Set the answer mode
1. Press the MENU MG[ VQ GPVGT OGPW UGNGEVKQP
 2TGUU VJG Navigation MG[ VQ UGNGEV #059
/#%*+0' CPF VJGP RTGUU OK MG[ VQ UGNGEV
3. Press the Navigation MG[ VQ UGNGEV #059'4
MODE and then press OK MG[ VQ UGNGEV
 2TGUU VJG Navigation MG[ VQ UGNGEV #059'4
10.; QT #059 4'%14& CPF VJGP RTGUU
OK MG[ VQ EQPſTO
Answering machine operation
by handset (eco710 ONLY)
;QW ECP WUG VJG CPUYGT OCEJKPG OGPW QP VJG
handset to access and change the settings for all the
answering machine functions.
Turn the answering machine on or off
1. Press MENU MG[ VQ GPVGT OGPW UGNGEVKQP
 2TGUU VJG Navigation MG[ VQ UGNGEV #059
/#%*+0' CPF VJGP RTGUU OK MG[ VQ UGNGEV
3. Press the Navigation MG[ VQ UGNGEV #059
101(( CPF VJGP RTGUU OK MG[ VQ UGNGEV
 2TGUU VJG Navigation MG[ VQ UGNGEV 10 QT 1((
and then press OK MG[ VQ EQPſTO
 # EQPſTOCVKQP DGGR KU RNC[GF 2TGUU END MG[
VQ IQ DCEM VQ UVCPFD[ OQFG
Ŗ ;QW ECP CNUQ VWTP VJG CPUYGTKPI OCEJKPG QP QT QHH
by pressing the ON/OFF MG[ QP VJG DCUG
Ŗ If the answering machine is turned off and the
OCUVGT 2+0 KU UVKNN UGV CV KVU FGHCWNV  VJG
answering machine will not answer to any incoming
TKPIKPI DWV KH VJG OCUVGT 2+0 JCU DGGP EJCPIGF KV
will answer after 10 rings to allow remote access.
ANSWERING MACHINE OPERATION
BY HANDSET (ECO710 ONLY)