Sylvania DVL150F - Manual (Page 6)

– 6 – EN
Setup
Connection to a TV
Connections
If your TV has AUDIO/VIDEO input jacks, see the following instructions. If not, see the section “Connecting to
RF Modulator” on the front page.
Setup
AUDIO OUT
COAXIAL R
L Y
S-VIDEO OUT
COMPONENT VIDEO OUT
CR/PR
DIGITAL AUDIO OUT
VIDEO OUT CB/PB
AUDIO OUT
COAXIAL R
L
DIGITAL AUDIO OUT
L R
AUDIO IN
VIDEO IN
VIDEO
OUT
S-VIDEO IN
S-VIDEO
OUT
(Analog) AUDIO OUT VIDEO OUT
TV
Method 1
Good picture Basic Audio
Method 2
Better picture
S-VIDEO OUT
Video
cable
(supplied)
Audio cable
(supplied)
S-Video
cable
(commercially
available)
This unit
Hint Hint
• Connect this unit directly to the TV. If the Audio/Video cables are connected to a VCR, pictures may be distorted
due to the copy protection system.
• When progressive scanning mode is selected, no video signal will be output from the VIDEO OUT or S-VIDEO OUT jack.
After you have completed connections
• Hit the input selector button (usually TV/VIDEO, INPUT or AUX) on your TV to switch an appropriate external input chan-
nel (usually near channel 0) for viewing the picture from this unit. If the picture does not appear, also refer to the manual
accompanying your TV.
INPUT MODES FOR COMMON TV BRANDS (Example)
• Listed below are inputs for common brand name TV’s.
Admiral: AUX
Curtis Mathis: LINE1, LINE2, 00, 90, 91, 92, 93
GE: INPUT, TV/VCR, 00, 90, 91, 92, 93
Hitachi: INPUT, AUX
JVC: A/V CHANNEL, INPUT1, SVIDEO,
INPUT2
Kenwood: AUX
LXI-Series: 00
Magnavox: AUX CHANNEL
Panasonic: TV/VIDEO
RCA: INPUT, TV/VCR, 00, 90, 91, 92, 93
Samsung: TV/VIDEO
Sanyo: VIDEO
Sharp: 00
Sony: VIDEO1, VIDEO2, VIDEO3
Toshiba: TV/GAME
Zenith: 00
C B
Y
C R
COMPONENT
VIDEO IN
or
P B
Y
P R
Y COMPONENT
VIDEO OUT
C R /P R
VIDEO
OUT
C B /P B
Method 3
Best picture
COMPONENT VIDEO OUT
Component Video cables
(commercially available)
If your TV is compatible with 525p (480p) progressive scanning and you want to
enjoy that high quality picture;
You must select the connection Method 3 above and progressive scanning mode. To set the mode,
press and hold [PLAY B
B ] on the front panel for more than 5 seconds, so that PROGRESSIVE SCAN
indicator will light up.
If your TV is not compatible with progressive scanning;
Use this unit in interlace mode. Make sure that PROGRESSIVE SCAN indicator is off. If not, press
and hold [PLAY B] on this unit for more than 5 seconds, so that PROGRESSIVE SCAN indicator of
this unit will light off.
POWER SKIP SKIP PLAY STOP O
more than 5 seconds
[Interlace mode]
[Progressive scanning mode]
[DVD]
E6122UD_ENSP.qx33 05.1.26 12:03 Page 6