Optimus CD-3321 - Manual (Page 16)

16
3. Press POWER to turn on the system.
The POWER indicator lights.
4. Press PLAY on the deck you are
using. The button locks down and
the tape begins to play.
5. Adjust VOLUME , E-BASS , and BAL-
ANCE as needed.
6. The tape automatically stops when it
reaches the end. To stop playing the
tape before it reaches the end,
press
STOP/EJECT . Press STOP/
EJECT again to open the cassette
compartment, so you can remove
the cassette tape.
To play the other side, turn the tape over
and press
PLAY .
Consecutive Play
The CD-3321 can play one side of a
tape in Tape 2, then automatically play
one side of a tape in Tape 1.
With tapes loaded in both Tape 1 and
Tape 2, press
PLAY on Tape 2, and
press PAUSE then PLAY on Tape 1.
The tape in Tape 2 plays to the end of
the first side. Then Tape 1’s tape plays
to the end of its first side.
Using Fast-Forward and
Rewind
While the tape is stopped or playing,
press
FAST-F or REWIND to move the
tape rapidly forward or backward. Press
STOP/EJECT when you reach the de-
sired section or when the tape reaches
the end.
illus
illus
illus
Illus of
FAST-F/
REWIND
14-546a.fm Page 16 Wednesday, April 7, 1999 6:57 AM