Sylvania SRTD413 - Manual (Page 12)

– 12 –
CONNECTING TO AN AMPLIFIER/RECEIVER WITH A
DOLBY DIGITAL DECODER (for DVD)
To use this TV/DVD to play a DVD disc in a 5.1 channel Dolby Digital surround format, the TV/DVD can
outputs a DOLBY DIGITAL Data stream from its COAXIAL digital audio out jack. By hooking the TV/DVD
up to a receiver with Dolby Digital decoder, you can enjoy high-quality surround sound as enjoyed in movie
theaters.
Use audio coaxial digital cables available at retail stores for the audio connections.
NOTES:
• Be sure to turn off the power to all components in the system before connecting another component.
• Refer to the Owner's Manuals for the components to be connected to the TV/DVD.
• If connected to a receiver with Dolby Digital decoder, set DOLBY DIGITAL to ON for audio output in the
setup mode. (See page 28 to set DOLBY DIGITAL to ON.)
• Unless connected to a receiver with Dolby Digital decoder, set DOLBY DIGITAL to OFF for audio output
in the setup mode. Playing a TV/DVD using incorrect settings may generate noise distortion and may also
damage the speakers.
• Only DVD audio is available using the digital audio out jack.
COAXIAL ANT.
Front speaker
(left)
Center
speaker
Front speaker
(right)
Surround
speaker
(left)
Surround
speaker
(right)
Subwoofer
To COAXIAL digital
audio out jack
(only DVD audio out)
To coaxial ditigal
audio input jack
Amplifier/receiver with
Dolby Digital decoder
[Fig. 7]
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are
trademarks of Dolby Laboratories.
EN
0C28
T8055UF(EN).qx3 04.6.29 7:10 PM Page 12