OTC Tools 61821 - Manual (Page 2)

Operating Instructions, Form No. 102841, Back sheet 1 of 3
SAFETY EXPLANATIONS
Two safety symbols are used to identify any action or lack of action that can cause personal injury. Your
reading and understanding of these safety symbols is very important.
DANGER - Danger is used only when your action or lack of action will cause serious human injury or
death.
WARNING - Warning is used to describe any action or lack of action where a serious injury can occur.
IMPORTANT - Important is used when action or lack of action can cause equipment failure, either immediate
or over a long period of time.
Pictogram Definition
Do not remove this component. For service only. Pressure must be released.
WARNING: It is the operator's responsibility to read and understand the following
safety statements,
• Only qualified operators should install, operate, adjust, maintain, clean, repair, or
transport this machinery.
• These components are designed for general use in normal environments. These
components are not specifically designed for lifting and moving people, agri-food
machinery, certain types of mobile machinery or special work environments such as:
explosive, flammable or corrosive. Only the user can decide the suitability of this
machinery in these conditions or extreme environments. OTC will supply information
necessary to help make these decisions.
These instructions are intended for end-user application needs. Most problems with new equipment are caused by
improper operation or installation. Detailed service repair instructions or parts lists can be obtained from your nearest
OTC facility.
Output at 50%
50"
o colors: Red PMS-186 and
b n white mylar with clear
m minate, self adhesive back.
Image is 200%