Optimus CTR-116 - Manual (Page 17)

17
At HIGH , a soft sound turns on the recorder. At LOW , it
takes a louder sound to start recording. Experiment to find
the best setting for
VOX in your recording environment.
3. Press RECORD . RECORD and PLAY lock down.
Recording starts and the REC/BATT indicator lights when
the microphone receives a loud enough signal (voice or
other sound). Recording stops and the
REC/BATT indicator
fades when the signal ceases. This continues throughout
recording.
Caution: Never try to force down RECORD if you have
removed the erase protection tab (see “Preventing Acci-
dental Erasure” on Page 21). This can damage the record/
play mechanism.
Note: If the audio input is too strong, the indicator lights
steadily. Either move the microphone away from the sound
source or lower the volume of the sound source.
MIC
REC /BAT T
PAUS E
STOP EJECT
FAST-F CUE
REWIN D REVIEW
PLAY RECORD
EA RP H
MIC
RE M O T
D C 6
REWIND
REVIEW PLAY RECORD
14-1122.fm Page 17 Wednesday, May 17, 2000 9:55 AM