Connecting to a digital audio device (rear), 21 3 installing the batteries in remote control – Sylvania 6720FDG User Manual

Page 7

Advertising
background image

EN

AUDIO OUT

COAXIAL

To Coaxial digital
Audio input jack

Audio coaxial digital cable
(commercially available)

To AUDIO OUT
COAXIAL jack
(DVD AUDIO OUT Only )

Dolby Digital

decoder

AUDIO OUT

COAXIAL

or

MD deck,
DAT deck, etc.

To Coaxial digital
Audio input jack

7

You can connect this unit to a digital audio device to enjoy the digital audio of DVD. Connect to an amplifier
equipped with digital input jacks, such as MD deck or DAT deck. To play a DVD disc in a Dolby Digital Multi-
channel surround format in this unit, connect to a Dolby Digital decoder.
Use an audio coaxial digital cable (commercially available) for the audio connections.

CONNECTING TO A DIGITAL AUDIO DEVICE (REAR)

(OUT)

(IN)

(IN)

NOTES:

• The audio source on a disc in a Dolby Digital Multi-channel surround format cannot be recorded as digital sound by an

MD or DAT deck.

• Be sure to turn off the power to all devices in the system before connecting another device.
• Refer to the Owner's Manuals for the devices to be connected to the unit.
• To connect to a MD or DAT deck, set "DOLBY DIGITAL" to "PCM" for the audio output in the setup mode, and to con-

nect to a Dolby Digital decoder, set to "BITSTREAM" (Refer to "AUDIO SETTING" on page 30). Playing a unit using
incorrect settings may generate noise distortion and may also damage the speakers.

2

1

3

INSTALLING THE BATTERIES IN REMOTE CONTROL

1) Open the battery compartment cover by pressing

the cover on the remote unit in the direction of
the arrow.

2) Insert 2 “AA” penlight batteries into the battery

compartment in the direction indicated by the
polarity (+/-) markings.

3) Replace the cover.

[BATTERY PRECAUTIONS]

• Be sure to follow the correct polarity as indicat-

ed in the battery compartment. Reversed batter-
ies may cause damage to the device.

• Do not mix different types of batteries together

(e.g. Alkaline and Carbon-Zinc) or old batteries
with fresh ones.

• If the device is not to be used for a long period

of time, remove the batteries to prevent damage
or injury from possible battery leakage.

• Do not try to recharge batteries not intended to

be recharged; they can overheat and rupture.

PREP

ARA

TION FOR USE

T1200UA_EN.QX3 06.2.6 11:15 AM Page 7

Advertising