Olympus C-1 - Manual (Page 35)

Flash shooting
Basi
c shooti
n
g
functi
ons
3
Basi
c shooti
n
g
functi
ons
35
for link
1
Change the flash mode by repeatedly pressing Y # .
• The flash settings change in the order of
the arrows.
• If no operation is performed for about 2
seconds, the flash mode is set and the mode
selection screen is automatically exited.
2
Press the shutter button halfway.
• In conditions where the flash will fire, #
lights (flash stand-by).
3
Press the shutter button fully to
take the picture.
TIPS
The # (flash charge) indication blinks.
→ The flash is charging. Wait until # turns off.
Note
• The flash does not fire in the following situations:
During super macro shooting and panorama shooting.
• The flash may not give you the optimum result in macro mode with the zoom
set to wide-angle (W). Check the resulting picture on the monitor.
AUTO
0030
2560 1920 2560 1920 HQ HQ
30 30 30
AUTO
HQ HQ
30 30 30
2560 2560
1920
1920 2560 2560
1920
1920
# mark