Cue marker, Using an external microphone – Optimus CTR-115 User Manual

Page 21

Advertising
background image

21

CUE MARKER

To mark the beginning of a recording, press

CUE MARKER

for

about 3 seconds during the recording. This records a brief tone
on the tape. When you press

FAST-F/CUE

or

REWIND/REV

while the tape plays, you hear the tone when the tape reaches
the point you marked.

USING AN EXTERNAL MICROPHONE

The CTR-115’s built-in microphone works well in most situa-
tions, but you can connect an external microphone (not sup-
plied) with a

1

/

8

-inch (3.5-mm) plug to the recorder’s

MIC

jack.

This automatically disconnects the built-in microphone.

Note: Your local RadioShack store sells a variety of micro-
phones.

Set

VOX/TONE

to

IN

for VOX recording, or to

OUT

for manual re-

cording.

If the microphone has an ON/OFF switch for remote control,
connect the microphone to the

REM

and

MIC

jacks. Then you

can start and stop recording with the switch on the microphone.

14-1121.fm Page 21 Thursday, July 1, 1999 2:42 PM

Advertising
This manual is related to the following products: