Oricom AM880 - Manual (Page 11)

10
4. After all your messages have been played, you hear two short beeps.
You have 10 seconds to access the menu again, otherwise, the
AM880 disconnects automatically.
Press:
To:
7# Remote Turn on/off the AM880
If you forget to turn your AM880 on, you can phone
in from a remote location to turn it on.
1. Call your telephone number.
2. The AM880 answers after 10 rings. After the
beep, enter your 3-digit security Code.
3. After the second beep, press 7# then hang up.
Subsequent messages will be recorded
8# Re-record an OGM
1. When you hear a beep, begin recording your new
OGM (up to 5 minutes).
2. When you have finished recording your new
OGM, press 5#.
The new OGM will playback to you.
3. Hang up the telephone.
9# Remote Record Memo
If you press 9# (to record memo):
1. When you hear a beep, begin recording your
memo.
2. When you have finished recording your memo
message, press 5#.
(press 5# to stop recording)
0# Remote Room monitoring
If you press 0# (to room monitoring):
1. The built-in microphone of your answering
machine will be switched on and you can then
listen in on the room.
2. Every 30 seconds you will hear a beep. If you
want to continue listening, press 0# again within
10 seconds. Otherwise the AM880 will hang up.
3. To end room monitoring, hang up the telephone
or press 5# if you want to use other remote
functions.