Sylvania 6620LDT - Manual (Page 18)

– 18 – EN
• Shaded buttons are used for following operation.
GETTING STARTED
Turn on the power of amplifier and any other compo-
nents, if necessary.
1
Press [POWER] then the power will turn on.
2
Open the disc door manually.
3
Insert a disc with the label facing back of the unit to
start playing it. By simply placing the disc gently into
the slot, it will be loaded automatically.
• Playback will start from the first chapter/track of the disc.
• If the playback does not start automatically,
press [PLAY O].
• When you playback a DVD which features a
title menu, it may appear on the screen. In this
case, refer to “TITLE MENU” on page 19.
4
Press [STOP C] to stop playback.
5
Press [EJECT A] to remove the disc from the unit.
• When the DVD mode has been switched to the
TV mode, the DVD mode shuts down first and
then the TV picture and sound appears in about
4 seconds. Similarly, when [POWER] is
pressed to turn off in the DVD mode, this mode
shuts down first and then the unit is turned off.
• “ ” may appear at the top-right on the TV
screen during operation, warning that a pro-
hibited operation has been encountered by the
DVD or the disc.
• With DVDs that use titles for playback pro-
gram signals, playback may start from the
second title or it may skip these titles.
• During the playback of a two layered disc,
pictures may stop for a moment. This happens
when the 1st layer switches to the 2nd layer.
This is not a malfunction.
MP3 PLAYBACK
1
In stop mode, press [DISC MENU], then press
[K
K ] or [L L ] to select the desired group or track.
• If a group is selected, press [B] or [ENTER] to go
on to the track selection screen. Press [s] to go
back to previous screen.(except for the top page.)
• If a track is selected, press [ENTER] to start
playing tracks. Starting from the one you’ve just
chosen the subsequent tracks will be played.
• If the entire file list cannot be displayed at once
on a screen, “n” appears to go to the next page.
• Press [TITLE] to return to the top file of the
highest hierarchy in the program and file list.
2
Press [STOP C C ] to stop playback.
• Folders are known as Groups; files are known as Tracks.
• MP3 files are accompanied by icon.
• Maximum of 255 folders can be recognized.
• Maximum of 999 files can be recognized.
• Up to 8 hierarchies can be created.
This unit recommends the use of files recorded
at the below specifications:
• Sampling frequency: 44.1kHz or 48kHz
• Constant bit rate: 32kbps ~ 320kbps
• For MP3 file recorded in Variable Bit Rate (VBR),
the unit may not display the actual elapsed time.
3
P
LAYING A DISC
BASIC PLAYBACK
REV
SLOW
PLAY
STOP
FWD
ENTER
PAUSE
DISC
MENU
RETURN TITLE SETUP
DISPLAY
SKIP MUTE ZOOM
SELECT POWER PICTURE EJECT
3
POWER
STOP
EJECT
NOTE
folder name 1
folder name 2
folder name 3
folder name 4
file name 1
file name 2
file name 3
folder name 1
DISC
MENU
STOP
NOTE