Oki C6100dn User Manual
Page 116
OkiLAN 8300e Network User’s Guide
UNIX - 116
331 Password required.
Password:<CR>
230 User Logged in
ftp>
The network card logical directory structure is hierarchical.
Move to the logical directory; it is not possible to output print
data to the root directory.
2. Move to the preferable logical directory using the cd
command.
Example: moving to the lp directory and confirming the
current directory.
ftp> cd /lp
250 Command OK.
ftp> pwd
257 ”/lp” is current directory
ftp>
3. Configure the transfer mode
There are two types of transfer mode: BINARY mode, in
which the file contents are output as it is and ASCII mode,
which converts the LF code to the CR+LF code. If a binary file
converted by the printer driver is transferred, the transfer
mode has to be BINARY mode.
Example: changing transfer mode to binary mode and
verifying the current mode
ftp> type binary