Outlaw Audio LFM-1Plus - Manual (Page 3)

3 Variable Tuning LFM Series Low Frequency Modules
Owner’s Manual
The contents of this manual are Copyright © 2007 by Outlaw Audio, LLC, and may not be
duplicated or reproduced by any means, whether physical, electronic or otherwise without
prior written consent from Outlaw Audio.
Outlaw Audio and the Outlaw Audio logo are registered trademarks of Outlaw Audio, LLC.
Specifications are those in effect at the time of printing. Outlaw Audio reserves the right
to change specifications or designs at any time without notice or obligation to modify
existing units.
Table of Contents
2 Please Read First
3 Table of Contents
3 Variable Tuning LFM Series Low Frequency Modules
3 Unpacking
3 Accessories
4 Before You Begin
4 Installing Subwoofer Feet
4 Variable Tuning LFM Controls and Connections
5 Subwoofers, Bass and Overall System Performance
5 Setup Guide
5 Connecting to Your System
7 Connecting to a System with a Subwoofer Preamp Output
7 Connecting to a System with no Preamp Outputs
7 Subwoofer Placement
7 Notes On Subwoofer Placement
7 Setting the Variable Tuning LFM Series
Subwoofer's Controls
7 Variable Crossover
8 Phase Switch
8 Port Switch
8 Volume Level
8 S 2 : The Scattered Subwoofer System
8 What’s Needed to Connect Two Subwoofers?
8 Placement and Level Control
9 Care and Maintenance
9 Cleaning
9
When You Are Away
9 Troubleshooting
9 Outlaw Service Information
9 Troubleshooting Guide
10 Model LFM-1 EX Specifications
10 Model LFM-1 Plus Specifications
11 The Outlaw Audio 30-Day Satisfaction Guarantee
11 Outlaw Audio Limited Warranty
Variable Tuning LFM Series
Low Frequency Modules
Congratulations on the purchase of an Outlaw Audio Variable Tuning LFM (Low
Frequency Module). You now own one of the finest subwoofers available. The
Variable Tuning LFM series subwoofers provide deep, tight, bass extension that’s
powerful enough to meet the most demanding requirements of any movie or
musical source. The LFM series subwoofers blend effortlessly with both small
satellite speakers and large tower speakers alike. This seamless integration is
made possible by a flexible crossover network that may also be disengaged for
use with advanced bass-management systems.
Among the Variable Tuning LFM’s many features are:
■
A down firing design that virtually eliminates audible port noise
■
A long throw 12" driver for deep bass extension
■
A powerful 325 watt BASH¨ amplifier for precise driver control
■
Signal Sense for automatic turn on/off
■
180-degree phase control
■
Line and speaker level inputs
■
Variable Port Tuning
■
Detachable power cord
Unpacking
The carton and packing materials used in shipping your new subwoofer were
specially designed to cushion it from the shocks and vibrations of shipping. We
strongly suggest that you save the carton and packing materials to use if you move,
or if the unit ever needs to be shipped back to us for any reason.
To minimize the size of the carton in storage, you may wish to flatten it by carefully
opening the top and bottom flaps and folding the carton. Packing materials that
cannot be collapsed should be saved along with the carton in a plastic bag.
Accessories
After unpacking your Variable Tuning LFM series subwoofer please confirm that
the following accessories have been included.
■
AC Power Cord
■
4 Black (Metal) Carpet Spikes
■
4 Black (Meta)l Dimpled Discs
■
Port Plug (Installed In port on bottom of subwoofer)
■
This Owner’s Manual
If any of the above is missing from your shipment, please contact Outlaw Audio
immediately.
Variable Tuning LFM Series Low Frequency Module