Preparing the remote controller, Inserting the batteries, Detach the battery cover – Onkyo FR-N3X User Manual

Page 13: Insert the two r6 (size aa) batteries, Attach the battery cover, Using the remote controller

Advertising
background image

13

Inserting the batteries

Notes

• Do not mix new batteries with old batteries or different

kinds of batteries.

• To avoid corrosion, remove the batteries if the remote

controller is not to be used for a long period of time.

• Remove dead batteries immediately to avoid damage

from corrosion. If the remote controller does not operate
smoothly, replace both batteries at the same time.

• The life of the batteries supplied is about six months but

will vary depending on usage.

Using the remote controller

Point the remote controller toward the remote control
sensor.

Notes

• Place the unit away from strong light such as direct sun-

light or inverted fluorescent light, which can prevent
proper operation of the remote controller.

• Using another remote controller of the same type in the

same room or using the unit near equipment that uses
infrared rays may cause operational interference.

• Do not put any object, such as a book, on the remote

controller. The buttons of the remote controller may acci-
dentally be pressed and drain the batteries.

• Make sure the audio rack doors do not have colored

glass. Placing the unit behind such doors may prevent
proper remote controller operation.

• If there is an obstacle between the remote controller and

the remote control sensor, the remote controller will not
operate.

Preparing the remote controller

1

2

3

Detach the battery
cover.

Insert the two R6
(size AA) batter-
ies.

Be sure to match the
+ and – ends of the
batteries with the dia-
gram inside the bat-
tery compartment.

Attach the battery
cover.

Remote control
sensor

About 5 m

(16 f

eet)

Advertising