Olympus CAMEDIA C-40 ZOOM - Manual (Page 7)

7
Control panel indications
Control panel indications
1
Flash intensity control
● Displayed when the amount of the light emitted by the flash is adjusted.
2
Spot metering mode
● Displayed when the Spot metering mode is set.
3
Self-timer
● Displayed when the self-timer is activated.
4
Sequential shooting
● Displayed when the drive mode is set to Sequential shooting or AF
Sequential shooting.
5
Remote control
● Displayed when remote control shooting is activated.
6
White balance
● Displayed when the White balance is set to any mode except AUTO.
7
ISO
● Displayed when the ISO is set to any mode except AUTO.
8
Card error
● When the power is turned on, the camera checks the card. If there is a
problem with the card, this indication appears.
9
Card writing
● Displayed when recorded pictures are being written to a card.
0
Record mode (TIFF, SHQ, HQ, SQ1, SQ2)
● Displays the record mode. If SHQ or HQ is set to ENLARGE SIZE, the
corresponding indication blinks.
!
Macro mode
● Displayed when the macro mode is engaged.
@
Manual Focus
● Displayed when locking focus using the Manual focus function.
1
!
@
2 3 678 9 4 5
0
#
$ % ^ & *
1 C-40ZBasic-E1 01.10.11 9:39 AM Page 7