Sylvania 6724DF - Manual (Page 25)

PLAYBACK
NORMAL PLAYBACK
Make sure ...
• The unit must be turned on.
1
Insert a prerecorded tape
If the erase-prevention tab has been removed, the
unit will start playback automatically.
2
To begin playback
Press [PLAY O].
3
To stop playback
Press [STOP C].
NOTES:
•
Even in the DVD mode, you can start the VCR
playback if you press [B PLAY] (of the TV/VCR
side).
•
VCR playback will stop and the mode will change
to the DVD mode by pressing [SELECT],
[B PLAY] (DVD side) or [A OPEN/CLOSE].
TV/VCR
TRACKING ADJUSTMENT
• Tracking adjustment will be set automatically
(Digital Tracking function) when you start play-
back.
• Noise lines (black and white streaks) may appear
on the playback picture when playing pre-recorded
tapes or tapes recorded on other VCR. If this
occurs, use [CH. K / L] until the streaks disappear.
• You can reduce the noise lines by using
[CH. K / L] in the slow mode too. Tracking
adjustment in the slow mode will not be set auto-
matically.
• To return to the Digital Auto Tracking function,
stop the tape once and start playback.
TV/VCR
PLAY B
STOP
- 25 - EN
STILL PICTURE
You can view a still picture on the TV screen during
playback (the still mode). Press [PAUSE F] during
playback. Only tapes recorded in the SLP mode will
show the least amount of lines. Press [PLAY O] to
return to playback.
NOTES:
• You can advance the picture one frame at a time by
pressing [PAUSE F] during the still mode.
• If it is left in the pause mode for more than 5 min-
utes, the unit will automatically switch to the stop
mode.
TV/VCR
SLOW MOTION
Press [PAUSE F], then press [D] to start the play-
back in slow motion. The unit mutes the sound dur-
ing slow motion. Press [PLAY O] to return to nor-
mal playback.
NOTE:
• If it is left in the slow mode for more than 5 min-
utes, the unit will automatically go into the stop
mode.
TV/VCR
VERTICAL HOLD CONTROL
In the pause/still mode only, when the picture begins
to vibrate vertically, stabilize the picture by using
[CH. K / L].
NOTE:
• If there are video noise lines on the screen, refer to
TRACKING ADJUSTMENT on this page.
TV/VCR