Olivetti 4501 - Manual (Page 95)

NORMAL COPYING
4-13
4
Automatic two-sided copying from the document glass
When the optional duplex module is installed, the following automatic two-sided copying can be performed. The
paper is automatically turned over during copying, allowing two-sided copies to be made with ease.
1 Place the original on the document glass.
(pages 4-3 to 4-6)
Align the corner of the original with the tip of the
arrow mark
on the document glass scale.
Place the original in the appropriate position for its
size as shown above.
2 Touch the [2-SIDED COPY] key.
3 Touch the [1-sided to 2-sided copy] key.
When making automatic two-sided copies of a
one-sided A3 (11" x 17") or B4 (8-1/2" x 14") size
portrait original, or when you wish to invert the top
and bottom of the back side of a two-sided original,
touch the [BINDING CHANGE] key.
4 Touch the [OK] key.
Perform steps 3 to 8 on pages 4-11 and 4-12.
Original Copy
Original scale
mark
Original scale
mark
A5 or
5½ x 8½
A4 or 8½x11 A3 or 11x17
B4 or
8½x14
A4R or 8½x11R
SPECIAL MODES
2-SIDED COPY
OUTPUT
Example of a
portrait-oriented
original Example of a
landscape-oriented
original
OK
0
BINDING