Operation, Setting the time, Adjusting the display brightness – Optimus CR-315 User Manual

Page 4: Playing the radio, Using the sleep timer

Advertising
background image

4

OPERATION

SETTING THE TIME

To set the hour, hold down

TIME

and re-

peatedly press (or hold)

HOUR

until the

desired hour appears.

PM

lights to indi-

cate a PM hour.

To set minutes, hold down

TIME

and re-

peatedly press (or hold)

MINUTE

until the

desired minutes appear.

ADJUSTING THE DISPLAY
BRIGHTNESS

Set

DIMMER

HI/LO

to

HI

or

LO

to adjust

the display’s brightness as desired.

PLAYING THE RADIO

1. Rotate

VOLUME

to the left to turn

down the volume.

2. To turn on the radio, slide

ALARM/

AUTO/OFF/ON

to

ON

.

3. Slide

BAND

to

FM

or

AM

then rotate

VOLUME

to a comfortable listening

level.

4. Rotate

TUNING

. A pointer indicates

the station’s frequency on the dial
below the clock.

Note: The AM antenna is built-in.
Rotate the clock radio for the best
AM reception. The AC power cord
also serves as the FM antenna. For
the best FM reception, fully extend
the AC power cord.

5. To turn off the radio, slide

ALARM/

AUTO/OFF/ON

to

OFF

.

USING THE SLEEP TIMER

You can set the radio to play for up to 2
hours and then automatically turn off.
Follow these steps to set the play time.

1. Slide

ALARM/AUTO/OFF/ON

to the

desired alarm sound (

AUTO

for the

radio, or

ALARM

for the buzzer).

2.

To play the radio for 1 hour,

press

SLEEP.

The radio turns on, plays 1

hour then automatically turns off.

To set the play time between 1 and
2 hours,

press

SLEEP

. The radio

turns on and

0:59

appears. Then

hold down

SLEEP

and press

HOUR

.

The time changes to

1:59

.

12-1615.fm Page 4 Friday, August 13, 1999 9:29 AM

Advertising