Onkyo DV-SP500 - Manual (Page 44)

44
■ Adjusting the picture quality settings
– To create your own setting (1)
1 Use the cursor button ( 3) to select [Start] then press
ENTER.
Interlace Video Memory Select
Interlace Video Setup
2 Use the cursor button ( ∞) to select [Video Setup] then
press ENTER.
3 Use the cursor buttons ( 2/3) to select the setting to [On] or
[Off].
DISPLAY ENTER
Fine Focus On Off
Move Select Check
Interlace Video Memory Select
Interlace Video Setup
4 Use the cursor buttons ( 5/∞) to select the setting to adjust.
You can adjust any or all of the following picture quality factors:
<Interlace video settings>
Fine Focus
Switch on to reveal greater detail (higher resolution) in the
picture.
Contrast
Adjusts the contrast of the elements in the picture.
Sharpness
Adjusts the sharpness of the mid-frequency (less detailed)
elements in the picture. (This setting is only effective when [Fine
Focus] is [On].)
Chroma Level
Adjusts how saturated colors appear.
Hue
Adjusts the overall color balance between red and green. (This is
only effective when the player is connected using the VIDEO
OUT or S-VIDEO OUT jacks.)
<Progressive/auto progressive video settings>
DNR
Reduces noise.
Sharpness
Adjusts the sharpness of the mid-frequency (less detailed)
elements in the picture.
Detail
Enhances picture edges.
Chroma delay
Adjusts luminance (Y) and color (C).
Gamma
Adjusts the black level.
You can either select a preprogrammed setting designed to
match certain program types or make adjustments to match
your own preferences and save them in the player’s memory.
Make changes to the [Video Adjust] setting in the Setup
screen Video 2 menu.
Expert denotes more detailed settings. If the item is not
displayed, please refer to page 39 to display it.
■ Selecting a preprogrammed setting
1 Use the cursor button ( 3) to select [Start] then press
ENTER.
—
—
Video2 Language General Audio V1
Exit Move
Background
Video Adjust
Gray
Start
Picture Quality Controls
SETUP
Interlace Video Memory Select
Interlace Video Setup
• When setting [Component Out] to [Interlace] in the Setup screen
Video 1 menu, select [Interlace Video Memory Select], then
press ENTER.
• When setting [Component Out] to [Progressive] in the Setup
screen Video 1 menu, select [Progressive Video Memory
Select], then press ENTER.
2 Use the cursor buttons ( 2/3/5/∞) to select one of the
preprogrammed picture quality settings.
Standard (Factory Setting):
Presents the video with no effect added.
Cinema:
Delivers a cinema-like picture.
Animation:
Provides images with bright clear colors.
Memory 1, Memory 2, and Memory 3:
These are user programmable settings. See ‘Adjusting the picture
quality settings’ on pages 44 and 45 for more information.
If there is a DVD or Video CD playing, the effects of each setting
can be viewed while it is highlighted on the screen. This may be
useful in selecting an appropriate setting.
3 Press ENTER.
The new selection is set.
Notes
• Each picture quality setting is defined by a number of individual
settings, described in ‘Adjusting the picture quality settings’ on
pages 44 and 45.
• Depending on the disc and the TV/monitor, you may not see the
effect clearly.
Adjusting the Video Quality
Adjusting Audio and Video Settings
Memory 1 Memory 2 Memory 3
Cinema Animation Standard