Olympus zoom2000 DLX - Manual (Page 31)

CORRECTING THE DATA
(for QUART7DATE/DLX models)
Press the MODE button for two
seconds or longer.
Press the mode button again to choose the
data to be corrected until it starts blinking. And
press the SET button to correct the data.
If you press the button once, the number on display
will advance by 1. And if you keep it pressed, the
numbers will run through in rapid succession.
The year indication will start blinking
Note: As you press the mode button, the blinking indication changes in the order of year, month, day, hour, and minute. The data
correction will be finished when the mode button is pressed again. 31