Olympus C-150 EN - Manual (Page 31)

29
En
Playback
All-frame erase
This function erases all the pictures on the card.
1
In the playback mode top menu, select MODE MENU T CARD T
CARD SETUP, and press
í
.
2
Press
Ññ
to select ALL ERASE, then press .
3
Press Ññ to select YES, then press .
• All the pictures are erased. Protected pictures are not erased.
Formatting cards (Card setup)
This function lets you format a card. Formatting prepares cards to receive
data. Before using non-Olympus cards or cards which have been formatted
on a PC, you must format the card with this camera.
All existing data, including protected pictures, are erased when the
card is formatted. Make sure that you save or transfer important data
to a PC before formatting a used card.
1
In the top menu, select MODE MENU T CARD T CARD SETUP,
and press
í
.
• Shooting mode: The
FORMAT screen is displayed.
• Playback mode: The CARD SETUP screen is displayed.
2
If the FORMAT screen is displayed, press
Ññ
to select YES.
If the CARD SETUP screen is displayed, press
Ññ
to select
FORMAT, then press .
When the FORMAT screen appears, press
Ññ
to select YES.
3
Press .
• The BUSY bar is displayed and the card is formatted.
1 D390/C150_B-E1 03.2.3 1:39 PM Page 29