Onkyo HT-S990THX - Manual (Page 49)

49
Using the Listening Modes —Continued
With the Late Night function, you can reduce the
dynamic range of Dolby Digital material so that you can
still hear quiet parts even when listening at low volume
levels—ideal for watching movies late at night when you
don’t want to disturb anyone.
Notes:
• The effect of the Late Night function depends on the
Dolby Digital material that you are playing, and with
some material there will be little or no effect.
• The Late Night function is set to Off when the AV
receiver is set to Standby.
With the Re-EQ, you can soften overly bright movie
soundtracks, which are typically mixed for reproduction
in a movie theater.
Re-EQ can be used with the following listening modes:
Dolby Digital, Dolby Digital EX, PLII/IIx Movie, DTS,
DTS-ES, DTS Neo:6 Cinema, DTS 96/24,
Dolby/DTS+PLIIx Movie, Dolby/DTS+Neo:6,
DTS+Dolby EX, THX Surround EX, THX Cinema2 and
THX Cinema.
The Audio Adjust settings only affect speaker set A.
Using the Late Night Function
(Dolby Digital only)
1 Press the [RECEIVER] REMOTE
MODE button, and then press the
[L NIGHT] button repeatedly to
select:
Off: Late Night function off.
Low: Small reduction in dynamic
range.
High: Big reduction in dynamic
range.
MUTING
PREVIOUS
MENU
GUIDE
TOP MENU
SP A / B
SETUP RETURN
PLAYLIST/CAT PLAYLIST/CAT
RANDOM SUBTITLE
PLAY MODE
AUDIO REPEAT
RC- 650M
--/---
TAPE
M D/CDR
HDD
CABLE
ON/STANDBY
DIMMER
ENT D TUN
SLEEP
10 11 12
INPUT SELECTOR
HDD DVD VCR
REMOTE MODE
V 1 V 2 V 3
C D TAPE TUNER
DVD MULTI CH
LISTENING MODE
T V
DISPLAY
TEST TONE CH SEL
SURROUND STEREO
Re-EQ
LEVEL+ LEVEL-
L NIGHT
VOL VOL
SAT
VCR
T V
DVD RECEIVER
C D
INPUT
+10 0 CLR
1 2 3
4 5 6
7 8 9
ENTER
CH
DISC
ALBUM
SETUP
RECEIVER
L NIGHT
Re-EQ
ENTER
RECEIVER
L NIGHT
Using the Re-EQ
1 Press the [RECEIVER] REMOTE
MODE button, and then press the
[Re-EQ] button repeatedly to
select:
On: Re-EQ on.
Off: Re-EQ off.
Using the Audio Adjust Settings
1 Press the [RECEIVER] button fol-
lowed by the [SETUP] button.
2 Use the Up and Down [ ]/[ ]
buttons to select “5. Audio
Adjust,” and then press [ENTER].
3 Use the Left and Right [ ]/[ ]
buttons to change the setting.
Press the Down [ ] button to
select the next setting.
Repeat this step for the other settings.
RECEIVER
Re-EQ
RECEIVER
SETUP