Optiquest QW22B VS11725 - Manual (Page 10)

Install the Stand on a stable surface. The monitor may cause injury or damage if it falls
or is dropped.

Do not give a strong impact to the monitor. It may cause damage.

Unplug the monitor before installation to avoid electric shock or damage.

The monitor is shipped with the stand detached. Be sure to attach the stand before operating the display
and remove if it is necessary to re-box.
HOW TO USE THE STAND
CAUTION
<Installation>
1. Put a piece of soft cloth on the table
beforehand to prevent the monitor from being
scratched. Lay the monitor flat on a table with
front face down.
2. The Stand-Bottom is pulled up as shown in
the figure.
3. Install the Stand-Base to the Stand-Bottom.
<Remove>
1. Put a piece of soft cloth on the table
beforehand to prevent the monitor from being
scratched. Lay the monitor flat on a table with
front face down.
2. Hold down the hooks outside and pull the
Stand-Base away from the Stand-Bottom.
Optiquest Q22wb