Omron Healthcare HBF-400 - Manual (Page 12)

12
CHANGING PERSONAL DATA
CHANGING PERSONAL PROFILES
If personal data changes, the information stored in the Personal Profile Number for the age, gender
or height setting must be changed.
1. Turn the monitor ON.
Press the Power Switch. The CAL symbol blinks on the display followed by the 0.0 lb.
2. Press the USER button.
Select the Personal Profile Number you want to change.
3. Press the SET button.
The CAL symbol blinks on the display followed by the 0.0 lb.
4. Press the SET button again.
The current value set for the age setting blinks on the display.
5. Adjust the settings you need to change.
Press the UP button or DOWN button to adjust the setting. Then press the SET button.
NOTE: If no change is needed, press the SET button to proceed to the next setting.
The CAL symbol blinks on the display followed by the 0.0 lb symbol. You can take a measurement.
DELETING PERSONAL PROFILES
All the personal data stored in a Personal Profile Number can be deleted.
NOTE: When you delete the personal data, the results of the previous measurement stored in the
memory for this Personal Profile Number will also be deleted.
1. Turn the monitor ON.
Press the Power Switch. The CAL symbol blinks on the display followed by the 0.0 lb.
2. Press the USER button.
Select the Personal Profile Number you want to change.
3. Press the SET button.
The CAL symbol blinks on the display followed by the 0.0 lb.
4. Press the SET button again.
The current value set for the age setting blinks on the display.
5. Press the GUEST/MEMORY button for two seconds.
The personal data is deleted from the memory. The Clr symbol appears on the display followed by the
Profile Number and the symbols for gender, age and height as illustrated below.
HBF-400-IM 2/20/06 5:50 PM Page 12