Amplifier wiring – Orion 3002 User Manual

Page 9

Advertising
background image

AMPLIFIER WIRING

Power Connections

●

Orion 2002 Fuse Size: (1) 25 AMP

●

Orion 3002 Fuse Size: (1) 30 AMP

●

Minimum 8 AWG power and ground cable is recommended for acceptable per-
formance.

●

Fuse power wire prior to wire passing through panels or near sharp edges and less
than 18" from battery.

●

Ground amplifier to a good chassis ground as close as possible to the amplifier.

●

Add extra ground wire (minimum 8 AWG) between the negative terminal of the
battery and the chassis.

NOTE:

The addition of a ground wire from the battery to the chassis of the vehicle
improves the ability of the battery to supply power to the amplifier. This is recom-
mended because the current delivery of the factory electrical system was designed
only to accommodate electronics supplied by the auto manufacturer.

Speaker Connections

Two Channel Stereo Configuration

●

Lowest recommended impedance is 2W stereo.

●

Stereo input should be used for this configuration.

●

Outputs can be configured for high-pass, low-pass, or full range operation.

8

©2004 Directed Electronics, Inc.

Advertising
This manual is related to the following products: