Oricom TP68 - Manual (Page 23)

- Caller Display (CID) -
23
You can now look through the caller list using the Jog dial. When you reach the
last storage location in the list, the display shows the message “End of list”.
When all newly recorded numbers have been checked, the CID button no
longer flashes.
If the message “Not available” appears in the display, the number is not
available for showing in the display. The caller has either suppressed the
transmission of his number or the number could not be transferred.
5.2 Dialling a telephone number directly from the Caller List
You can dial telephone numbers directly from the caller list.
A. Please follow the instructions: Display shows:
Press the CID button once. First number from the
caller list
Turn the Jog dial until the required telephone number
appears in the display.
Telephone number /
name
Now press the ENTER button and the number will be
dialled directly using the handsfree facility. Lift the handset
if you want to call using the handset.
Note!
Before dialling, your telephone compares the country and local dialling codes of the
number dialled with your location (local dialling code). If you have entered your
local dialling code during installation, the appropriate numbers will not be dialled if
this is a number from within your local network.