Olympus DM-2 - Manual (Page 88)

88
3
EN
Menu setting method
Setting the playback scene
[Play Scene]
Voice files recorded in the recorder and
music files downloaded from the PC can be
saved in the playback settings of your choice
to suit the different sound qualities and
playback methods.
1
Select [Play Scene] from the menu
on the [Play Menu].
• For details on how to enter the menu
settings, please see “Menu setting
method” (
☞ P.67).
2
Select [Scene Select] or [Scene
Save].
When [Scene Select] is selected:
1 Press the + or – button to select the
playback scene you want to set.
2 Press the `OK button to complete the
selection.
Notes
• If the recorder is in use at the preset start
time, the timer recording will start directly
after stopping the recorder.
• Even if the power is turned of f or the
recorder is put on Hold, timer recording will
start at a specified time.
• If three timer recordings have the same
starting times, [Preset 1] has the highest
priority and [Preset 3] has the lowest.
• If the starting time for timer recording and
alarm playback (
☞ P.91) is set for the same
time, timer recording will have priority.
• If the batteries run out while recording
based on the timer setting, the recorder will
stop recording. Check the battery power
before starting the timer recording.
• If the [Time & Date] is not correct, timer
recording cannot be set at the specified
time, so make sure the [Time & Date] is
correct before setting timer recording. If it
is not correct, reset [Time & Date] (
☞ P.31).
• The recorder will record in the built-in
memory [Folder A] when the microSD
card is selected as the recording
destination and the microSD card is not
inserted during Timer Recording.
M
e
nu
set
ting
m
e
th
od