Oki PS-900 - Manual (Page 5)

7
www.okinternational.com
7000-2250 修订版 1
10. SAFETY INFORMATION
With power applied, the tip temperature can be > 300°C. Failure to observe the following
precautions may lead to injury to users or damage the equipment:
•
Do not touch any metallic parts of the hand-piece
• Do not use near flammable items
• Do not use unit for any function other than described in this manual
• Use only genuine PS replacement parts
• Use in a well ventilated area
• Do not use the equipment with wet hands
• Connect only to properly grounded outlets to prevent risk of electric shock.
• Always place hand-piece back into the workstand to prevent accidental
burning of oneself or surrounding objects.
Although the systems offer superior EOS (Electrical Overstress) protection, periodic checks of
the instrument cord should be incorporated into standard operator maintenance procedures.
Waste Electrical and Electronic Equipment Directive - WEEE (2002/96/EC).
When this product is no longer required, if it cannot be re-used,
we ask our customers not to dispose of it as unsorted municipal
waste but to appropriately recycle the product. In Europe, please
contact your OK International distributor who can advise the
recycling options available (www.okinternational.com).
WARNING !
1
www.okinternational.com
7000-2250 修订版 1
PS-900
焊接系统
操作手册和用户指南
祝贺您购买了 PS-900 焊接系统。它利用 SmartHeat ® 技术确保其卓越的性能，且无需系统校
准。它的设计和制造过程均符合最高质量标准，可提供始终如一的卓越性能和可靠性。
本文用来指导您安装、操作和自行维护焊接台。我们建议您熟读本文，以便优化性能和操作
连贯性。
目录
1. 包装/备件清单 ..........................................................1
2. 首次安装...................................................................2
3. Smartheat ® ..............................................................2
4. 选择加热烙铁头........................................................3
5. 更换加热烙铁头........................................................3
6. 更换加热体组件........................................................4
7. 故障排除...................................................................4
8. 规格说明...................................................................5
9. 保修..........................................................................6
10. 安全信息.................................................................7
1-a. 包装清单 （提供重新订货的零件号）：
a. PS-900 主机 （零件号：PS-PW900）
b. PS-900 自动休眠烙铁支架- 黑色 （零件号：WS2）
c. 海绵 （零件号：AC-YS4）
d. PS-900 焊接手柄（含加热体组件） （零件号：PS-HC3）
e. 烙铁头拆卸垫 （零件号：AC-CP2）
f. 说明手册
g. 说明手册
1-b.
其他备件/耗材：
a. 加热体组件 （PS-900 系统） （零件号：PS-CA3）
b. 手柄线/（无加热体组件） （零件号：PS-H3）
c. PS-900 自动休眠烙铁支架 - 绿色 （零件号：WS2G）
d. 加热烙铁头 （参见第 4 部分）
e. PS-900 功率表 （零件号：PS-PM900）