Oki C5100 58357102 - Manual (Page 4)

4
Network Install: Hardware
Connect to the Network Port
Note: No Ethernet ® cable is supplied with the printer. Use an Ethernet cable
with two twisted wire pairs and an RJ45 plug.
□ Turn the printer off.
□ Remove the plug from the Ethernet port ( 1 ), then connect your Ethernet cable to the port.
□ Connect the other end of the cable to the network port.
□ Turn the printer on and wait for the print server’s STATUS light ( 2 ) to stop blinking.
□ Press the TEST button ( 3 ) on the print server. The Network Information configuration sheets print.
Keep these sheets handy: they contain information you need to set up the printer on your network.