Onkyo DV-SP502 - Manual (Page 44)

44
Audio Settings and Video Adjust menus —Continued
From the Video Adjust screen you can adjust various set-
tings that affect how the picture is presented.
Note:
• Depending on your TV, the picture may appear dis-
torted if the brightness is set too high. If this happens,
lower the brightness.
Video Adjust menu
1 Press SETUP and select “Video
Adjust” from the on-screen dis-
play.
2 Make settings using the / / /
(cursor) buttons, and ENTER.
You can adjust the following picture
quality settings:
• Sharpness – Adjusts the sharpness
of edges in the picture (Fine, Stan-
dard, Soft).
• Brightness – Adjusts the overall
brightness (–20 to +20).
• Contrast – Adjusts the contrast
between light and dark (–16 to +16).
• Gamma – Adjusts the “warmth” of
the picture (High, Medium, Low,
Off).
ON STANDBY
PLAY
MODE
DISPLAY
DIMMER
MENU
SETUP
TOP MENU
RETURN
AUDIO ANGLE SUBTITLE ZOOM
RC-574DV
CLEAR
OPEN/
CLOSE
ENTER
1 2 3
6
7 8 9
0
4 5
ENTER
SETUP
SETUP
Video Adjust
ENTER
Sharpness
Brightness
Contrast
Gamma
Hue
Chroma Level
BNR
Standard
0
0
Off
0
0
Off
Video Adjust
• Hue – Adjusts the red/green balance
(Green 9 to Red 9).
• Chroma Level – Adjusts how satu-
rated colors appear (–9 to +9).
• BNR – Switches on/off block noise
reduction (On, Off (default)).
Adjust the Brightness, Contrast, Hue and
Chroma Level settings using the
/
(cursor left/right) buttons.
3 Press ENTER to save your set-
tings and exit the Video Adjust
screen.
Brightness min max 0
ENTER
DV-SP502E_En.book Page 44 Friday, July 16, 2004 3:34 PM