Onkyo BD-SP808 - Manual (Page 46)

46 EN
FUNCTION SETUP
■ Digital out setting
When “Audio Mute” is selected in “HDMI Audio Out” setting, HDMI audio signal will be muted and the audio signals
output from AUDIO OUTPUT (DIGITAL OPTICAL / COAXIAL) jacks change depending on “Digital Out” setting.
Quick HDMI Audio Out Audio Mute Digital Out
Bitstream*:
When playing back discs recorded in Dolby Digital, Dolby Digital Plus, Dolby TrueHD, DTS® or DTS-HD®,
the corresponding core stream (Dolby Digital or DTS®) are output.
LPCM:
Full decoded 2ch PCM signal will be output from AUDIO OUTPUT (DIGITAL OPTICAL / COAXIAL) jacks.
• This setting is not effective when the HDMI audio signal is output.
■ Speaker setting
This unit allows you to enjoy multi-channel surround sound such as 7.1-channel / 5.1-channel surround.
Front left and right speakers
Centre speaker
Subwoofer
Surround left and right speakers
Surround back left and
right speakers
e.g.) basic layout with 7.1-channel surround system
To make the most of its feature, set up your speakers appropriately by referring to the following table.
Speaker setting options are available at the following locations;
<Speaker setting for the audio signal output from HDMI OUT jack>
(Available when you have HDMI cable connected to HDMI OUT jack)
Quick HDMI Audio Out HDMI Multi(LPCM)
Custom Audio HDMI Audio Out HDMI Multi(LPCM)