Olympus P-10 - Manual (Page 15)

15
Preparation
Printing
For Your
Information
Introduction
ENGLISH
Loading the ink ribbon cartridge
About the print pack
You need the provided starter kit or an optional print pack for printing.
Always use the ink ribbon cartridge and print paper supplied together
in the same carton.
Do not use printed paper or paper that has been fed through the
printer.
1
Open the cartridge door while pushing down on the cartridge
door tab.
2
Release the ink ribbon cartridge stop, and wind the ink ribbon to
remove the slack.
To continue using a partially used ink ribbon cartridge, insert after
removing slack as shown in the drawing.
While pressing the center of the
reel, wind the ink ribbon in the
direction of the arrow.
p10_e_000_bookfile.book Page 15 Monday, December 15, 2003 11:51 AM