Oki C330 - Manual (Page 59)

59 – C330/C530 Menu Functions
Y ADJUST +2.00MIL
LIMETER
~
0.00MILL
IMETER
~
-
2.00MILLI
METER
Adjusts the position of a whole print image
in the direction the paper runs, that is verti-
cally, in 0.25 mm increments.
Any parts of the print image that are outside
the printable area as a result of this shift will
be cropped.
Corrections in a negative value are ignored
in PS mode.
DUPLEX X
ADJUST
+2.00MIL
LIMETER
~
0.00MILL
IMETER
~
-
2.00MILLI
METER
When printing the reverse page of a duplex
job, adjusts the position of the whole print
image in the direction that is perpendicular
to the direction the paper runs, that is hori-
zontally, in 0.25 mm increments.
Any parts of the print image that are outside
the printable area as a result of this shift will
be cropped.
DUPLEX Y
ADJUST
+2.00MIL
LIMETER
~
0.00MILL
IMETER
~
-
2.00MILLI
METER
When printing the reverse page of a duplex
job, adjusts the position of the whole print
image in the direction the paper runs, that is
vertically, in 0.25 mm increments.
Any parts of the print image that are outside
the printable area as a result of this shift will
be cropped.
Corrections in a negative value are ignored
in PS mode.
DRUM CLEAN-
ING
ON
OFF Sets whether to rotate the drum in idle prior
to printing in order to reduce any horizontal
white lines.
CAUTION: Each additional rotation will
shorten the ID life by that amount.
HEX DUMP EXECUTE Prints out data received from the host PC in
hexadecimal Dump. Turning off the power
supply switch restores Normal Mode from
HEX Dump Mode.
ITEM ACTION EXPLANATION