Sylvania SRD4900 - Manual (Page 21)

SETUP AUDIO
DRC
DOWN SAMPLING
DOLBY DIGITAL ON
ON
ON
D
VD Functions
5 5
– 21 – EN
Hint Hint
TV ASPECT:
• Select “4:3 LETTER BOX”,
so that black bars appear on
the top and bottom of the
screen.
• Select “4:3 PAN & SCAN” for
a full height picture with
both sides trimmed.
• Select “16:9 WIDE” if a
wide-screen TV is connect-
ed to this unit.
STILL MODE:
• Select “AUTO”.
If your TV picture is not
clear, review 2 options
below.
• If you select “FIELD”, the
picture in the still mode will
be stabilized.
• If you select “FRAME”, the
picture in the still mode will
be highly defined.
TV Display Selection
You can change the display functions. Follow the step 1) to 3) in the “CUSTOM Menu” section on page 20.
4 4
or
Select the desired item
B
DISPLAY menu
AUDIO Setting
Choose the appropriate audio settings for your equipment. It only affects during the playback of DVD discs. Follow the step 1)
to 3) in the “CUSTOM Menu” section on page 20.
4 4
or
Select the desired item
C
AUDIO menu
6 6 To exit the menu
SETUP
TV ASPECT:
(Default: 4:3 LETTER BOX)
See Hint to the right. QUICK
ANGLE ICON:
(Default: ON)
Set to “ON” to show the angle icon when multiple camera
angles are available during DVD playback.
AUTO POWER OFF:
(Default: ON)
Set to “ON” to turn this unit off automatically after
35 minutes of no use.
TV ASPECT
4:3 LETTER BOX
4:3 PAN & SCAN
16:9 WIDE
TV ASPECT 4:3 LETTERBOX
STILL MODE AUTO
ANGLE ICON ON
AUTO POWER OFF ON
TV ASPECT 4:3 LETTERBOX
STILL MODE AUTO
ANGLE ICON ON
AUTO POWER OFF ON 4:3 LETTERBOX
AUTO
ON
OFF
TV ASPECT 4:3 LETTERBOX
STILL MODE AUTO
ANGLE ICON ON
AUTO POWER OFF ON 4:3 LETTERBOX
AUTO
OFF
ON
Select the
desired
setting
or
ENTER ENTER ENTER
STILL MODE:
(Default: AUTO)
See Hint to the right.
TV ASPECT 4:3 LETTERBOX
STILL MODE AUTO
ANGLE ICON ON
AUTO POWER OFF ON
STILL MODE
AUTO
FIELD
FRAME
Select the
desired
setting
or
ENTER ENTER ENTER
5 5 6 6 To exit the menu
SETUP DRC (Dynamic Range Control):
(Default: ON)
Set to “ON” to compress the range between soft and loud sounds.
DOLBY DIGITAL:
(Default: ON)
Set to “ON” when the unit is connected to a Dolby Digital receiver.
• ON: Outputs a Dolby Digital Signals
• OFF: Convert the Dolby Digital into PCM (2 channel) QUICK
DRC ON
DOWN SAMPLING ON
DOLBY DIGITAL
ON
OFF
ON
ON
ENTER ENTER ENTER
ENTER ENTER ENTER
ENTER ENTER ENTER
ENTER ENTER ENTER
ENTER ENTER ENTER
DOWN SAMPLING:
(Default: ON)
Set to “ON” when outputting in 48 kHz.
Set to “OFF” when outputting the original sound.
DRC ON
DOWN SAMPLING ON
DOLBY DIGITAL
ON
ON
ON
OFF
ENTER ENTER ENTER
DRC ON
DOWN SAMPLING ON
DOLBY DIGITAL
ON
ON
OFF
ON
ENTER ENTER ENTER
Hint Hint
DRC:
• This function is available
only on the discs which are
recorded in the Dolby Digital
format.
DOWN SAMPLING:
• When playing disc with
copyright Protection, the
sound will be down sampled
at 48kHz, even if you set to
OFF.
• This function is available
only on digital output of a
disc recorded in 96kHz.
SETUP DISPLAY
TV ASPECT
STILL MODE
ANGLE ICON
AUTO POWER OFF 4:3 LETTER BOX
AUTO
ON
ON
H9602UD(EN)v1.qx3 04.2.20 11:42 PM Page 21