Oreck QS110 - Manual (Page 5)

4
Start-Up Instructions
The box should include
(a) Main housing (
fig. 1)
(b) Power head ( fig. 1)
(c) Adapter (power supply/charger)
(d) User’s Guide
Fig 1. Insert the power head into the
air intake of the main unit.
Charging the Unit
Fig 2. Before charging, make sure
both switches are in the “OFF”
position. Then insert the
adapter into an electrical outlet
and the plug into the charging
socket on the unit.
Charge
batteries for 16 hours before
initial use.
Caution: Do not allow the
battery to run down
completely before charging.
Running down battery will
cause battery life to shorten
severely.
Fig 3. A red lamp indicates the unit is
charging. It is normal for the
adapter to feel warm while the
battery is charging.
Recharge the unit as soon as
the motor power decreases
noticeably. The unit can be on
a constant charge so it is
always ready for use.
However, if the unit will not be
used for several weeks at a
time, unplugging it is recom-
mended.
Vacuuming
Fig 4. Push the slide switch forward
on the stick handle to clean
hard floor or carpet.
FLOOR - uses suction only for
vacuuming hard floors.
CARPET - uses suction and
engages brush roll to vacuum
Operating Instructions
1
2
3
4
ON / OFF
Switches
Recharge
Lamp
b
a