Speaker setup page – OPPO Digital OPPO DV-970HD User Manual

Page 32

Advertising
background image

S E T U P M E N U O P T I O N S

28

7. DivX VOD: Divx Video on Demand – To display the device registration code for DivX Video on

Demand service. To learn more, visit

www.divx.com/vod

Speaker Setup Page

1. Down-mix Mode: To set the audio down-mix mode to convert multi-channel audio into two-

channel output. This setting only affects the “Mixed L/R” analog audio outputs. The options
are:

Left/Right - Left and Right channels only. This mode is intended for use with two-channel

Dolby Pro Logic receivers. If the content is encoded with Dolby Pro Logic then the encoded
audio will be passed to the receiver for Dolby Pro Logic processing. For stereo content the
output will be stereo. For multi-channel content only the left front and right front channels
will be re-produced.

Stereo - This mode down-mixes decoded multi-channel (5.1ch) audio to 2-channel stereo

output. For stereo content the output will be stereo. For multi-channel content the surround
and center channels will be mixed with the left and right front channels. Recommended for
use with TV sets or stereo receiver/amplifiers.

V. Surround - Virtual Surround. This mode creates a virtual surround effect from stereo or

multi-channel audio contents.

5.1CH – This mode enables 5.1ch decoded analog audio output. The number of actual

output channels depends on the disc.


2. Front Speaker: To set the sound filtering control for the front speakers. The options are:

Large – Choose if the front speakers are large. Bass frequencies are passed to the front

speakers.

Small – Choose if the front speakers are small. Bass frequencies are not passed to the

front speakers to reduce possible distortion.


3. Center Speaker: To set the sound filtering control for the center speaker. The options are:

Large – Choose if the center speaker is large. Bass frequencies are passed to the center

speaker.

Small – Choose if the center speaker is small. Bass frequencies are not passed to the

center speaker to reduce possible distortion.

Off – Choose if there is no center speaker.


4. Rear Speaker: To set the sound filtering control for the rear speakers. The options are:

Advertising