Oregon Scientific RMR182 - Manual (Page 8)

EN
8
CALENDAR CLOCK DISPLAY MODES
The RMR182 supports four display modes in the sequence of:
MODE 1. Local Time
Hour, Minute, Second
----------------------------
Day, Month
MODE 2. Local Time
Hour, Minute, Weekday
-------------------------------
Day, Month
MODE 3. Local Time / Second Time-Zone Time
(local time) Hour, Minute, Weekday
----------------------------------------
(Second time-zone time) Hour, Minute
MODE 4. Second Time-Zone
Hour, Minute, Weekday
------------------------------
Day, Month
Each press on the [SET/MODE] button will toggle the display in
the above order.
Note: The bottom line of the display will be replaced by the alarm
time if the [( ( • ) )] button is pressed.
ABOUT RADIO RECEPTION
The RMR182 is designed to automatically synchronize its calendar
clock once it is brought within range of the Frankfurt DCF77 radio
signal.
When the RMR182 is within range, its radio-control mechanism
will override all manual settings.
When the unit is receiving radio signal, the radio reception signal
will start to blink. A complete reception generally takes about 2 to
10 minutes, depending on the strength of the radio signal.
When the reception is complete, the radio reception signal will
stop blinking. The strength of the reception in the last hour will be
indicated.
For better reception, place the clock away from metal objects and
electrical appliances to minimize interference.
- Strong
- Weak
- No Reception
- Receiving
RMR182_EN 8/16/04, 2:58 PM 8