Omega Vehicle Security TJ-USB - Manual (Page 5)

1-1
Introduction
1
Section 1 - Introduction
Please read this manual completely before installing and operating your TJ-USB
Probe.
It’s important read and follow all notes, cautions, warnings and safety
precautions before operating this device.
1.1 Precautions
• This device is not designed for use in any medical or nuclear applications.
• Do not operate this device in flammable or explosive environments.
• Do not operate this device outside of the recommended use outlined in this
manual.
NOTE:
There are no user serviceable parts inside your unit. Attempting to repair or service
your unit may void your warranty.
1.2 Safety Warnings and IEC Symbols
This device is marked with international safety and hazard symbols in
accordance with IEC 1010. It is important to read and follow all precautions and
instructions in this manual before operating or commissioning this device as it
contains important information relating to safety and EMC. Failure to follow all
safety precautions may result in injury and or damage to your calibrator. Use of
this device in a manner not specified by the manufacturer may impair protection
provided within the unit.
IEC symbols Description
1.3 Statement on Marking
It is the policy of OMEGA to comply with all world-wide safety and EMI/EMC
regulations that apply. OMEGA is constantly pursuing certification of its
products to the European New Approach Directives. OMEGA will add the CE
mark to every appropriate device upon certification.
1.4 General Description
Omega’s new USB-TC Series of thermocouple probes with direct USB connection
feature a rugged transition joint construction, 2 m (6') of shielded output cable
and free user software that converts your PC into a temperature meter, chart
recorder or data logger.
Caution, refer to accompanying documents
Waste Electrical and Electronic Equipment
Compliance
Figure 1. IEC Symbol