Oregon Scientific Jumbo RF Clock JM889NU - Manual (Page 7)

7
GB
Enabling/Disabling Radio Reception
To manually disable the reception of the RF signal, press and
hold the [UP ] and [DOWN ] buttons simultaneously for
2 seconds until the Radio Reception symbol completely
disappears.
To enable the reception again, press and hold [UP ] and
[DOWN ] buttons simultaneously for 2 seconds. The Radio
Reception symbol will blink and the unit will search for the RF
signal automatically.
TO SET THE CLOCK MANUALLY
To adjust the clock settings manually without automatic
RF synchronization, remember to disable the Radio Reception
first. Press once or press and hold the [UP ] or [DOWN ]
buttons to adjust the value of each setting.
NOTE
Diagram Instructions
1. Press and hold the CLOCK button for 2 seconds.
2. Adjust the current month. Press CLOCK when done.
Diagram Instructions
3. Adjust the current date. Press CLOCK when done.
4. Choose the language displayed for the day-of-week.
Press CLOCK when done.
5. Choose the current day-of-week. Press CLOCK when
done.
6. Adjust the current hour. Press CLOCK when done.
7. Adjust the current minute. Press CLOCK when done.
8. LCD Display returns to normal clock operation.