Oki POS 425D - Manual (Page 16)

16 OKIPOS 425D
|
1.5 Installing the Paper
Paper Specifications
Maximum thickness: 0.3 mm (0.012 inches)
A25002.doc
Media Type Width Length Weight Number
of
copies Thickness Diameter
Single part
(slip) 105 to 215.9mm
(4.13” to 8.5”) 70 to 297mm
(2.76” to 11.7”) 52 to 105 g/m 2
(14 to 28lb)
- 0.065 to 0.13
mm
(0.0026” to
0.005”)
-
Single part
(validation) 105 to 215.9mm
(4.13” to 8.5”) 70 to 297mm
(2.76” to 11.7”) 65 to 81 g/m 2
(17 to 21lb)
- 0.08 to
0.1mm
(0.0031” to
0.0039”) -
Cut-Sheet
Paper
(Sip/
Validation)
Note 1
Multi part
carbon lined
or pressure
sensitive
(slip) 105 to 215.9mm
(4.13” to 8.5”) 70 to 297mm
(2.76” to 11.7”) 34 to 40 g/m 2
(9 to 11lb)
Original
plus 4
copies 0.3mm max.
(0.012” max)
-
Cut-Sheet
paper
(counterfoil/
stub)
Single part
only
70mm or more
(2.76” or more ) 40mm or more
(1.57” or more) 65 to 81 g/m 2
(17 to 21lb)
- 0.08 to 0.1
mm
(0.0031” to
0.0039”)
-
Roll paper
Note 2 Single part 69.5mm/76.2m
m + 0.5mm
(2.73”/3”
+ 0.02”)
- 52 to 81g/m 2
(14 to 21lb)
- 0.065 to
0.1mm
(0.0026 to
0.039”) 83mm
max.
(3.27”
max)
Single part
76.2 to
215.9mm
(3” to 8.5”) 76.2 to 355.6mm
(3” to 14”) 52 to 81 g/m 2
(14 to 21lb)
- 0.065 to
0.1mm
(0.0026” to
0.0039”) -
Multi part
carbon
lined or
pressure
sensitive 76.2 to
215.9mm
(3” to 8.5”) 76.2 to 355.6mm
(3” to 14”) 34 to 40 g/m 2
(9 to 11lb)
Original
plus 3
copies
0.27mm max.
(0.0l” max) -
Sprocket
Paper
(Tractor)
Note 3
Multi part
interleaf 76.2 to
215.9mm
(3” to 8.5”) 76.2 to 355.6mm
(3” to 14”) 38 to 45 g/m 2
(10 to 12lb)
Original
plus 2
copies 0.27mm max.
(0.01” max)
-
Note 1: All part must be glued at the top. Multipart is slip only.
Note 2: The standard paper weight is 57g/m 2 (15lb).
Note 3: Multiple part paper should be fastened by spot-pasting or crimpling on both sides and should be free of wrinkles.