Sylvania DVL500A - Manual (Page 14)

USING THE TITLE MENU
DVD
With a DVD containing a title menu, you can select de-
sired titles from the menu.
1 Press the TITLE button.
● The title menu will appear.
2
Select the desired title.
● Press the arrow buttons (▼/▲/
B/s) to change the
setting, and then press the ENTER button.
CALLING UP A MENU SCREEN DUR-
ING PLAYBACK
For DVDs
● Press the MENU button to call up the DVD menu.
● Press the TITLE button to call up the title menu.
Note
● Contents of menus and corresponding menu opera-
tions may vary between discs. Refer to the manual
accompanying the disc for details.
PAUSING PLAYBACK OR
DISPLAYING A STILL PICTURE
DVD CD
1 Press the PAUSE button during playback.
● Playback will pause, with sound muted.
2
Press the PLAY button to resume playback.
RESUMING PLAYBACK FROM
THE POINT WHERE
PLAYBACK STOPPED
DVD
1 Press the STOP button during playback.
● Playback will stop, and "STOP"
will appear at the top-right of the
screen and then "MEMO ON" at
the top-left.
2 Press the PLAY button. Playback will start from
the point where the previous playback session
was stopped.
Notes
● The resume function can be reset by pressing the
STOP button twice or by opening the disc loading
tray.
● The resume function is not available with audio CDs.
STEPPING THROUGH FRAMES
DVD
1
Press the PAUSE button while playback is
paused.
● The next picture frame is dis-
played with sound muted each
time the button is pressed.
2 Press the PLAY button to resume playback.
PAUSE
PLAY
MEMO ON
PLAY
PAUSE
PLAY
0D05
E7800-01
- 14 - EN