Ositech comm 614006-001 - Manual (Page 12)

2 - 4 Trumpcard Ethernet LAN
Section Two
The second method of connecting to a 10BaseT Network is via the Media
Access Module. A female RJ-45 connector is provided on the Media
Access Module for 10BaseT Network connections.
To connect the Trumpcard to a 10BaseT Network connection using the
Media Access Module, follow these steps:
• For a multi-function Trumpcard, the Ethernet connection is
identified on the back of the PC Card. Insert the PCMCIA Ethernet
Adapter connector on the Media Access Module into the one
marked Ethernet.
• Plug the male RJ-45 connector from the Network access cable into
the female RJ-45 connector on the Media Access Module.
Note: The Trumpcard is keyed to go in one way only. If you feel resistance
before it is fully inserted, remove it, turn it over, and re-insert it.
Media Access Module 10BaseT Network Connection